FB Control Panels

Home » FB Control Panels

FB Control Panels

FB electrical control panels guarantee higher care, protection and security to any kind of submersible electropumps. Insulation class IP 55.

Contact us for more information

023 8841398 | 087 8246821

Description

Range IC

FB-Pumps-Control-Panels-Range-IC

The IC range of control panels is designed to control single-phase electropumps, and is equipped with a thermal cut-out and external starting capacitor.

Technical Specifications

  • Mains input 1ph ~ 50/60Hz 230V ±10%
  • Illuminated double-pole main switch 0 – 1
  • Starting capacitor
  • One control input for a float or pressure switch
  • Overload thermal cut-out with external reset
  • Thermoplastic housing
  • Outputs with pull-resistant cable glands
  • IP54 protection rating
  • Wall-mounting with knock-outs
  • Ambient temperature: -5/+40°C
  • Relative humidity at 40°C: 50% (non-condensing)

Range IC DUAL

FB-Pumps-Control-Panels-Range-IC-Dual

The IC-DUAL range of control panels is designed to control single-phase submersible electropumps, and is equipped with a double external starting capacitor to ensure high starting torques. At start-up, the voltage relay disconnects the electrolytic capacitor when the terminals of the second capacitor reach a certain voltage.

This control panel is recommended when

  • The power supply cable is especially long.
  • The pumped water is very hard (limescale formation).
  • There are high sand concentrations in the water.
  • The electropump is unused for long periods.

Technical Specifications

  • Mains input 1ph ~ 50/60Hz 230V ±10%
  • Illuminated double-pole main switch 0 – 1
  • Starting capacitor
  • Electrolytic capacitor (starting)
  • One control input for a float or pressure switch
  • Overload thermal cut-out with external reset
  • Thermoplastic housing
  • Outputs with pull-resistant cable glands
  • IP54 protection rating
  • Wall-mounting with knock-outs
  • Ambient temperature: -5/+40°C
  • Relative humidity at 40°C: 50% (non-condensing)

Range BASIC

FB-Pumps-Control-Panels-Range-Basic

BASIC range of electromechanical control panels is designed to control direct start-up of single-phase or three-phase electropumps, and is equipped with protective devices.

Technical Specifications

  • Mains input 1ph ~ 50/60Hz 230V ±10% (BASIC – M)
  • Mains input 3ph ~ 50/60Hz 400V ±10% (BASIC – T)
  • 400+230/24V transformer for auxiliary circuits (BASIC-T only)
  • Internal capacitor (BASIC-M only)
  • One float/pressure switch input
  • Automatic (stable) – 0 – Manual (unstable) selector
  • Green indicator light for pump running
  • Red alarm indicator light for pump protection tripped
  • Category AC3 line contactor
  • Overload thermal cut-out relay with internal reset
  • Protection fuses for auxiliary and power circuits
  • Thermoplastic housing (ABS)
  • Outputs with pull-resistant cable glands
  • IP55 protection rating
  • Ambient temperature: -5/+40°C
  • Relative humidity at 40°C: 50% (non-condensing)

Title

Go to Top